Power Interface
The Rhino Pi IQ9N (Rhino Pi IQ9N) is powered through a DC power jack.
Interface Specifications
For the position of the DC power jack on the board, see the interface layout diagram in Rhino Pi IQ9N Interface Description on the first page.
| Item | Parameter |
|---|---|
| Number of interfaces | 1 |
| Interface type | 2.5mm DC POWER JACK |
| Input voltage | Standard DC 19V |
| Complete device power solution | Standard DC 19V / 65W power adapter |
Power Consumption
| State | Power Consumption |
|---|---|
| Standby | 5W |
| AI Operation | 20W |
| Maximum power consumption | 50W |
Power-On and Indicators
After the device is powered, the power button (illuminated button) and the system LED indicate the power supply and operating status. Pressing and holding the power button powers the device on or off.
Notes
- Use the standard DC 19V / 65W power adapter.
- Do not use an adapter with a mismatched voltage or polarity, to avoid damaging the device.
- Pay attention to level matching when designing external interfaces.